MODENIGHT
ENTRIES088
LAST PUB2026-11-21
SIGOK
MOB-004
000%
MOB-004Hands-on testedOVERDUE

Mobile DJ power: the gig-day checklist that prevents silence

What to verify about the venue's power before you plug a single thing in — written from a working DJ's gig bag.

By BeatGuider Team· Published 2025-01-09· Verified 2025-01-091 min read
Spec plate
Applies toVarious gig rigs (owned)
EnvironmentMultiple real gig venues, 2022-2024

TODO(owner): add real product photos — hero image + 2+ in-body images required

Before you plug anything in

The #1 cause of silence at mobile gigs is power, not gear. Before you plug a single thing in, verify the venue's electrical situation. A shared circuit with a fridge or a kettle will cause dropouts or worse.

The gig-day checklist

  • Confirm dedicated circuit — no shared fridge / kettle / stage lights
  • Verify RCD/GFCI protection on the outlet feeding your rig
  • Measure actual draw with a clamp meter before soundcheck
  • Carry 2× the cable length you think you need
  • Have a battery-powered backup for the ceremony / announcements
  • Label your power cables so you can trace them in the dark
  • Bring a surge protector — venue power is dirty

Sizing your rig

A typical mobile DJ rig (controller + 2 powered speakers + lights) draws 800-1500W continuous. Check each component's nameplate rating, add them up, then add 50% headroom for inrush. Use our Power Calculator tool to size your generator or verify the venue circuit.

End of article