MODENIGHT
ENTRIES088
LAST PUB2026-11-21
SIGOK
GEAR-031
000%
GEAR-031Research-basedVERIFIED

Numark NS6II DJ Controller Review: Features, Pros & Cons

In-depth Numark NS6II Serato DJ controller review covering jog wheel displays, touch-capacitive knobs, I/O ports, and comparison to the original NS6. Full pros and cons.

By BeatGuider Team· Published 2026-04-07· Updated 2026-04-0711 min read

TODO(owner): add real product photos — hero image + 2+ in-body images required

Numark NS6II is almost the perfect controller with Serato DJ Pro and professional features a must-have in a DJ setup, nice construction, and solid design all around. Numark NS6II is an excellent successor — an excellent follow-up to the original NS6.

Specs at a Glance

SpecDetails
LevelMid-level / Professional
PowerPower supply (not USB powered)
Inputs2x MIC, 2x RCA (Line/Phono), 2x MIC
Outputs1x RCA Master, 1x XLR Master, 1x RCA Booth, 2x Headphone
SoftwareSerato DJ Pro (full version included)
Jog wheels6-inch with 2-inch color LCD display
PadsMini Akai MPC performance pads
USB portsDual USB for DJ handoffs

Things We Liked

FeatureWhy It's Great
Dual USB portsDJ handoffs and back-to-back sets
2-inch color LCD displaysIntegrated into each jog wheel
Digital mixer2 phono/line inputs
Serato DJ ProFull version included in the box
Touch-capacitive knobsEQ kills, effects, and filter rolls
6-inch multifunction jog wheelHigh resolution, loose feel, great for scratching

Things We Didn't Like

IssueWhy It's a Problem
Jog wheel center displayTakes up scratch space on the wheel surface
Plasticky fadersCrossfader and line faders feel cheap

First Impressions

Right off the bat, you have a really nice construction, solid design all around. You have metal almost everywhere — a little bit of plastic in the design but you have metal underneath all of your knobs. You have a nice silver finish on the sides. On the bottom, front, and back panels, there is a plastic-like material for all of your inputs, outputs, and controls.

Design

The NS6II has the same silver and black finish as the NS7, NS7II, NS7III, and all the other Numark DJ gear. I really like the finish — it still feels really solid, really heavyweight, and great for traveling and mobile DJs.

It works with Serato DJ Pro. You get the full license inside of the box. All you have to do is plug it in and you're ready to go. You also have drivers to download from the Numark website.

I/O Ports

Back Connections

PortDetails
Channel 3 & 4 inputsRCA (Line/Phono switchable)
Channel 1 & 2 inputsNot available — only channels 3 & 4 have standalone inputs
Grounding postFor turntables
USB portsDual USB for DJ switchovers
PowerPower cable with on/off switch
Master outputXLR balanced
Master RCAUnbalanced
Booth outputRCA
Mic 1 inputXLR/TRS combo
Mic 2 inputXLR/TRS combo

Front Controls

FeatureDetails
Mic controlsVolume knobs, Low and High EQ
Crossfader contourAdjustable curve
Headphone volumeLevel control
Headphone blendCue vs Master blend
Split cueOn/Off button
Headphone jacks1/4" and 1/8" (mini)

Mixer Section

All the way to the bottom, you have the crossfader — really smooth. It does feel rather plasticky, but it has screws on the faceplate so you can remove it and install an Innofader or mini-fader.

Line Faders

The line faders are also really loose and feel plasticky as well. I wish at this professional level, manufacturers would start putting Innofaders in for line and crossfader. They definitely get the job done and don't feel like they're going to break anytime soon.

Right above the line faders, you have A-B / OFF switches to change the side of the channel or make the crossfader irrelevant. You also have headphone CUE buttons right next to them.

Touch-Capacitive Knobs

Moving right along, you'll notice a lot of silver and black buttons. These are touch-capacitive knobs. When you touch them, they send a MIDI signal, meaning you can do different things:

FeatureHow It Works
Touch EQTouch all three EQ knobs (low, mid, high) to kill EQ
Touch FX on/offTouch once to turn on, release to turn off
Touch all onPress the touch button a second time — all EQ becomes touch-to-kill
Filter buttonTouch to do a roll + filter at the same time
Filter FXPress again to filter with whatever FX you have set up

At the top of each channel, you have your Gain knob, and at the bottom, oversized filter knobs. Next to the knobs, you have LED strip indicators so you can see where you are with line levels in the mix.

ControlFunction
Browse knobBig, oversized, at the top
Load buttons1, 2, 3, 4 — load tracks easily
View / BackNavigate through your library
PrepareSort tracks and prep for your set

Effects Section

Below the navigation, you have FX A and FX B buttons to enact effects on any channel. Above those, you have the traditional effects section with touch-capacitive knobs:

ControlFunction
FX 1Effect parameter control
FX 2Effect parameter control
FX 3Effect parameter control
Beat / Tap encoderSet beat timing for effects

Note: You can't use Serato internal effects on the microphone because the microphone is on a separate line. It's a standalone mixer setup for microphones.

Master Volume

You have nice highlighted red knobs for booth and master volume control. It's cool that they color-coded them so you don't mistake them for EQ or effects knobs.

Jog Wheels

Next up are the all-new jog wheels. These jog wheels are really high resolution. They scratch really nicely and have a nice loose feel to them.

Jog Wheel FeatureDetails
FeelNice and loose, great for scratching
ResolutionHigh resolution
Center display2-inch color LCD

Center Display Information

The center display shows you:

  • Overall track position
  • Needle position (for juggling and tricks)
  • Time remaining / time elapsed
  • Pitch control percentage

This means you can look at the jog wheel screen instead of your laptop — really helpful for staying focused on the performance.

Pitch Sliders

The pitch sliders are on the outside of the controller. They work very nicely — nice long throw, really deep, with a nice center light. No center click, just a smooth feel all around.

Performance Pads

At the bottom, you have all of your Serato DJ Pro performance features on the pads. These are mini Akai MPC pads — the same as on the Numark NV and Akai mixers/controllers.

Pad ModeFunction
CueHot cues
Cue LoopsAuto-loop from cue points
RollsLoop rolls
Manual SamplerTrigger samples manually
Velocity SamplerVelocity-sensitive sample trigger
SlicerSlice through the track

With Shift, you can access additional functions like Serato Flip, Tone Play, and more. All represented well here.

Extra Features

FeatureDetails
Strip searchScroll through tracks forward/backward
Slip modeSlip mode button
Bleep / CensorEdit out curse words — holds the edit while pressed, releases cleanly
Standalone mixer modeWorks without a computer
Serato DVS readyAdd turntables with timecode (paid upgrade)
Dual USBEasy DJ changeovers and back-to-back sets

Pros and Cons

For more details, check out our guide: Best Beginner DJ Speakers 2026.

Conclusion

The Numark NS6II is an excellent successor — an excellent follow-up to the original NS6. It really is a flagship-level DJ controller because it has excellent solid build quality perfect for the mobile DJ, perfect for travel, or anyone who wants solid equipment that won't break anytime soon.

What It Does Well

  • Build quality — Metal construction, solid design
  • Jog wheel displays — Cool center screens show track info
  • Touch-capacitive knobs — Innovative and fun to use
  • Mini MPC Akai pads — Responsive and feature-rich
  • Dual USB — Great for back-to-back sets

What Could Be Better

  • Jog wheel screens — Take up scratch surface area
  • Faders — Plasticky feel, wish they used Innofaders

All in all, it's an excellent DJ controller. Perfect for Serato DJs, perfect for mobile DJs who need two microphone inputs and rock-solid build quality.

Frequently asked questions

What software does the Numark NS6II come with?

The NS6II comes with the full version of Serato DJ Pro included in the box. You also need to download drivers from the Numark website and the latest Serato DJ Pro software.

Does the Numark NS6II have a standalone mixer mode?

Yes, the NS6II has a standalone mixer mode and is Serato DVS upgrade-ready, meaning you can attach turntables and use them with timecode.

Does the NS6II have dual USB ports?

Yes, it has dual USB ports for easy DJ handoffs — perfect for back-to-back sets or two DJs using the same controller with different laptops.

What are touch-capacitive knobs on the NS6II?

Touch-capacitive knobs detect when you touch them and send MIDI signals. You can use them for EQ kills, effects, and filter rolls — the same feature found on the NS7 and Numark NV.

End of article

Affiliate disclosure · BeatGuider may earn a commission on purchases made through affiliate links. Prices are set by the retailer. Affiliation does not influence test methodology or ratings — the Tested LED is lit only from validated frontmatter.