MODENIGHT
ENTRIES088
LAST PUB2026-11-21
SIGOK
GEAR-030
000%
GEAR-030Research-basedVERIFIED

Mixars Primo Serato DJ Controller Review: Full Breakdown & Comparison

In-depth Mixars Primo Serato DJ controller review covering build quality, jog wheel calibration, I/O ports, crossfader performance, and comparison to the DDJ-SR2.

By BeatGuider Team· Published 2026-04-05· Updated 2026-04-0512 min read

TODO(owner): add real product photos — hero image + 2+ in-body images required

This is a detailed review of the brand new Mixars Primo, 2-channel Serato DJ controller. Mixars has been coming out with really cool DJ gear for the last four or five years — they've produced really good DJ mixers and high-quality turntables.

But this is the new Mixars Primo, the newest DJ controller Mixars has out right now. They've been teasing this since about NAMM 2017 — we finally heard about it, heard nothing for a while, and now it's finally released.

Key Features

FeatureDetails
Channels2-channel for Serato DJ (4 decks layered)
BuildSturdy with brushed aluminum faceplate
Sound cardBuilt-in for simple USB connectivity
Pitch control100mm pitch slider
PowerUSB powered
Jog wheelsLarge aluminum with on-jog display and LED ring
Performance pads16 RGB pads
CrossfaderCurve adjustment & reverse
InputsCombo Mic (XLR/TRS), Aux RCA
Headphone outsTwo (1/4" and mini)
SoftwarePlug and play with Serato DJ

Build Quality

First, let's touch on the build quality. Like most of Mixars' gear, this is a mostly metal body — the top face is all metal, the back panel is metal, and the front panel is metal. There is some plastic along the sides and bottom, and there are cutouts in the bottom so you can grab it.

AspectQuality
Top faceBrushed aluminum
Back panelMetal
Front panelMetal
Sides/bottomPlastic with cutouts
Jog wheelsMetal top
PadsRubberized, solid feel
FadersNot cheap or plastic
Overall feelSolid, well-built, built to last

Everything feels really solid, well built, and well made — like all other Mixars products.

Setup

The setup is pretty easy. If you have Windows or Mac, download the latest drivers and firmware from the Mixars website, then download the latest Serato DJ software. Install everything and you're ready to play.

Jog Wheel Calibration

I had to do one thing I've never had to do with any other controller — calibrating the jog wheels. When I first set it up, every time I hit play and touched the jog wheel, the music would stop. I had to contact Mixars and they told me a jog wheel calibration was needed for some units.

How to Do Jog Wheel Calibration

  1. Make sure your Mixars Primo is switched off via the power switch at the back.
  2. Press and hold the buttons NOISE + FILTER, then switch on your device while holding the buttons.
  3. Press the left deck VINYL button to switch between auto-calibration and manual calibration.

Auto Calibration:

  • Both jog wheels are calibrated together
  • Do not touch the jog wheels during calibration
  • Press SHIFT to save

Manual Calibration:

  • Calibrate each jog wheel separately
  • Move the pitch fader of the side under calibration — sensitivity increases from bottom (min) to top (max)
  • Touch the jog wheel to test sensitivity (logo LED turns on when touch is sensed)
  • Adjust pitch slider for desired sensitivity
  • Repeat for the other deck
  • Press SHIFT to save

Inputs and Outputs

Back Connections

PortType
Master outputXLR balanced
Booth outputTRS 1/4"
Master RCAUnbalanced
Channel 1 inputRCA (Line/Phono switchable)
Channel 2 inputRCA (Line/Phono switchable)
Mic inputCombo XLR / 1/4"
USB portUSB-B
PowerDC-in + toggle switch

Front Connections

FeatureDetails
Mic/AUX switchToggle between mic and auxiliary input
Aux RCA inputFront-mounted, works without Serato (backup source)
Mic/AUX volumeDedicated volume knob
Tone controlFor microphone
Mic echo knobAdd echo to microphone
Crossfader reverseOn/Off toggle
Crossfader curveAdjustable knob
Cue/Master blendHeadphone monitoring blend
Headphone jacks1/4" and mini
Split cueOn/Off button
Headphone levelVolume control

Front Panel Controls

The Mixars Primo is actually 4-channel capable — deck 3 and deck 4 are layered in with switches at the top right. Deck 1 can switch to deck 3, and deck 2 can switch to deck 4.

However, it's easier to use this as a 2-channel controller. If you really want to use four decks, this works best in a 2-channel configuration.

Headphone Output

One thing to note: the headphone output is very strong and very loud. It's going to work well in those really loud DJ environments where you need to monitor your mix. It's definitely going to do the job.

Crossfader Performance

AspectRating
Cut-in distance~5mm — very long
Sharpest curveStill has significant dead space
ScratchingNot ideal for hard cuts
MixingServiceable
OverallBelow average for this class

The crossfaders feel pretty good, but the feel is kind of deceptive because this has a rather long 5mm cut-in distance. You can move the fader quite a bit before the sound cuts out. Even on the hardest curve setting, there's still a lot of dead space.

Long cut-in distance is a no-no for crossfaders, so it makes it a little bit useless for most super hard cuts. Take it for what it is — this controller doesn't have one of the better crossfaders.

Line Faders

The line faders are much stiffer than the crossfader and work exactly as they should.

Effects

The effects section sits in the middle — sound color effects including noise, filter, echo, and crush. They all work really nicely and they're all post-fader effects.

EffectDescription
NoiseAdds noise/broadcast effect
FilterLow-pass/high-pass sweep
EchoRhythmic delay repeats
CrushBit-crushing/distortion

You also have your FX1 and FX2 sections at the top of the controller with three traditional controls for your effects. The beat knob lets you select different effects within Serato DJ. You can use multi-effects or single effects, and they are post-crossfader and post-line fader.

Browse and Library

ControlFunction
Browse knobOversized, rubberized, clicky
Shift + BrowseNavigate through folders and playlists
Load buttonLoad selected track
Jog wheel ringVisual feedback when loading

Jog Wheels

AspectRating
TensionToo stiff for my liking
AccuracyVery accurate
SpinbacksOnly 2-3 rotations
Vinyl modeYes
Needle indicatorOnly works in last 20 seconds

The jog wheels themselves are pretty good but have rather stiff tension. I really wish they had a lot less tension and were more slippery. When I do a spinback, the wheel spins back maybe 2 or 3 turns. On a CDJ with a lighter feel, you get good spinbacks on one rotation. I can't do that here.

The tightness means it's more geared toward mixing as opposed to scratching, but they are very accurate. You'll get all the right sounds you're supposed to get.

Touch Needle Strip

The touch needle strip allows you to skip forward or backward within the track. You also have a Censor/Reverse button — hold it to momentarily censor any part of the song, or press Shift + Censor for the whole track to play in reverse.

Needle Indicator Issue

The only time you see a needle indicator on the jog wheel is in the last 20 seconds of your track. I would like to see that needle indicator working throughout the whole track — hopefully a firmware update will address this.

Play/Pause and Cue

These are hard plastic with what feels like brushed aluminum paint. They're very responsive and feel good, even though they're pretty small.

Performance Pads

Pad ModeFunction
Hot CueTrigger cue points
RollLoop roll
SlicerSlice through the track
SamplerTrigger samples
Pitch PlayPlay notes/pitches

The pads are very responsive rubberized pads. They don't have a click to them, but they have a good amount of give — they feel really good to drum and play with.

4-Channel Layering

Switch PositionDeck Assignment
NormalDeck 1 (left), Deck 2 (right)
LayeredDeck 3 (left), Deck 4 (right)

DVS Compatibility

Both channels are Serato DVS compatible, meaning you can use timecode control with turntables connected to the rear inputs. You just need to upgrade to the Serato DVS expansion pack.

Pros and Cons

Comparison: Mixars Primo vs Pioneer DDJ-SR2

FeatureMixars PrimoPioneer DDJ-SR2
BuildMetal top, front, backMostly plastic
CrossfaderLong cut-in (5mm)Shorter, more scratch-friendly
Jog wheelsStiff tensionLighter tension
Headphone outVery loudStandard
SizeCompactSimilar
SoftwareSerato DJ ProSerato DJ Pro
Standalone mixerYesNo

For more details, check out our guide: Best Beginner DJ Speakers 2026.

Conclusion

The new Mixars Primo 2-channel Serato DJ controller is a pretty good controller overall. If you're a Serato DJ user, there's not too much else in the 2-channel market that's current today.

What It Does Well

  • Build quality — Metal construction throughout, feels premium
  • Compact size — Easy to transport, fits in cramped DJ booths
  • Full Serato DJ Pro — Bundled with all the software you need
  • Standalone mixer mode — Use it without a computer
  • DVS compatibility — Add turntables with the DVS pack

What Could Be Better

  • Crossfader — The long cut-in distance makes scratching difficult
  • Jog wheels — Too much tension for my liking
  • Calibration — Having to calibrate out of the box is unusual

All in all, it's still a cool controller for Serato DJ. It's nice and compact, very well made, and will definitely suit the bill for DJs who don't care about having a super-slippery jog wheel or a short cut-in fader. For mixing DJs, this might be the perfect Serato DJ solution.

Frequently asked questions

Is the Mixars Primo a good controller for Serato DJ?

Yes, it's a solid 2-channel controller for Serato DJ with sturdy metal build quality, full pad modes, and a compact footprint. However, the crossfader has a long cut-in distance and the jog wheels have stiff tension, making it more suited for mixing than scratching.

Does the Mixars Primo work as a standalone mixer?

Yes, the Mixars Primo has a standalone mixer mode. You can use it without a computer by plugging devices into the channel inputs, and the sound color effects (noise, filter, echo, crush) will work with any source.

How do I calibrate the jog wheels on the Mixars Primo?

Turn off the unit, press and hold NOISE + FILTER buttons, switch on the power while holding them. Press VINYL to toggle auto/manual calibration. In auto mode, don't touch the jog wheels and press SHIFT to save. In manual mode, use the pitch fader to set sensitivity per deck.

Does the Mixars Primo come with Serato DJ Pro?

Yes, it comes bundled with the full Serato DJ Pro software, giving you everything you need to start mixing right out of the box.

End of article

Affiliate disclosure · BeatGuider may earn a commission on purchases made through affiliate links. Prices are set by the retailer. Affiliation does not influence test methodology or ratings — the Tested LED is lit only from validated frontmatter.